If you’re involved in the safe transfer of fluids and chemicals and in any part of the Agrochemicals Industry at EWFM we will have a solution to meet your needs
We specialise in media’s that require careful handling and engineer our products to suit your individual needs.
Available in sizes 0.5”, 1”, 1.5” and 2” our Nozzles are designed for filing storage containers such as IBC’s and Drums with a wide variety of fluids and chemicals.
Stainless Steel as standard but we are also able to provide in Hastelloy and can be PTFE lined. Hygienic versions can also be made.
You can have a manual or automatic version. The automatic version can detect the back pressure when the fluid reaches the top and automatically cuts off the valve.
You can also fit a range of vapour recovery systems, operation sensors and end fittings.
For further information on our Nozzles please see our website on the link below
Our Drum Filling Head is available in sizes of ½”, 1”, 1 ½”, and 2” and in a range of materials including Stainless Steel, Hastelloy & PTFE.
Used for filling drums, and IBCs, we can tailor these for most requirements.
They provide a safe, reliable and easy system for transferring products, even where the product is either too chemically aggressive, highly viscous or contains particles.
A Nitrogen Purge can be fitted on request, perfect for aggressive agrochemicals that need dispersing.
For further information on our Drum Filling Heads please see our website on the link below
Perfect for Bulk Filling and designed to suit your media requirements, our Loading Arms can be used to fill drums, IBC’s and Tankers.
Manufactured in sizes down to a 2″ bore they are genuinely supplied in a top filling configuration. They are easy to operate with high quality Swivels allowing for smooth movement.
Loading arms can be used with Agrochemicals be it acids or alkalis.
For further information on our Loading Arms please check out our website on the link below
Guaranteeing the highest level of safety, our Dry Disconnect Couplings are available in sizes from ¾” to 8” and are designed for a quick and spill free.
connection and disconnection of hoses and pipelines. Available in a range of materials to suit your requirement including Aluminium, Brass, Stainless Steel, Hastelloy and special plastics.
Available with selectivity avoiding cross contamination between products and are easy to use in all weathers. They provide no spill and are compatible with other manufacturer’s couplings according to STANAG 3756.
We can supply with an integrated swivel joint to take pressure off the hose and avoid it twisting.
Dry Disconnect Couplings are in use in installations all over the world, especially where certification is required as standard. All couplings are certified by TœV, Apragaz, Veritas, TDT, plus regionally required approvals.
For more information on our Dry Disconnect Couplings please see our website on the link below
Designed to prevent pull away accidents, protect terminal and loading / unloading equipment and eliminate unwanted product release.
The couplings breaking point will break at a set break load whereupon the internal valves will automatically close. This will minimise down time, save money, equipment and the environment.
They can come in sizes from 1” – 12” with working pressures from 16 – 25 Bar with up to 40 Bar available on request.
For further information on our Breakaway Couplings please see our website on the link below.
Whether you’re involved in Agrochemicals, be it Pesticides, Insecticides, Fungicides, Nematicides or Herbicides we will be able to help you
You can contact us through the website, directly on +44 1763 248650 or email [email protected] and challenge Guy and Mike today to find the right solution for you!