Compact Swivels are perfect for fitting into a tight spot. The design offers lightweight construction with combination bearings. We believe this Swivel is the most compact design on the market. Although commonly designed around the industry standard ASME 150lb flange dimensions, on request, it is also possible to re-drill to match other flange faces. High and low temperature modifications are also available on request.
The Compact Swivel Joint can be specified where a very low stack height is required. Please note the minimal standard nut clearance between the flanges.
If a higher load capacity is required please take a look at our Engineered Swivel Joints or send us an enquiry with your requirements. For minimal load requirements our Swivel Joint 2004 and 3996 Series may fit the bill with their basic low profile design.
Materials
- Carbon Steel
- Stainless Steel 316L
Sizes (inches)
- 2”, 3”, 4”, 5”, 6”, 8”, 10”, 12”
ANSI 150lb flanges (others are also available on request)
Seal Materials
- Nitrile
- Flourocarbon
- PTFE
Take a look at our Swivel Joints page for the comprehensive range available.
For more information on our Compact Swivel Joints, contact us direct by:
- Email: [email protected]
- Phone: +44 (0) 1763 248650
