Swivel Joint 3996 Series
3996-swivel-joint-elbow-cross-section3996-swivel-joint-drawing3996-swivel-joint

Swivel Joint 3996 Series – Carbon Steel and low profile

EWFM’s Swivel Joint 3996 series low profile is a perfect solution where vertical height is limited. Its low profile design compared to that of a normal swivel results in a reduction of height in the overall articulated pipework. This Swivel is often used as part of EWFM’s loading arms where a specific minimised height is required. The Swivel joint is constructed in Carbon Steel with butt weld ends in sizes 3″ and 4″. Although it is low profile this Swivel still has 2 rows of ball bearings on hardened and ground tracks meaning it’s suitable for most conditions and standard loads. We also offer an option with Stainless Steel sealing surfaces which increases the longevity of the Swivel. Please see the Model 2004 for an even more low profile swivel in this case with one set of ball bearings.

 

Available sizes

3″, 4″

 

Standard design

Carbon Steel construction

 

Assemblies

Swivels supplied as individual swivels or fabricated with elbows and end fittings in styles 20, 30, 40, 50 60, 70, 80 & 10.

 

Applications

Loading Arms
Low profile pipe work assemblies

 

Also see below product specification sheets for more information

Note that there are options for materials and duties as well as styles and dimensions.

 

Category:

Product Description

Swivel Joint 3996 Series

EWFM’s Swivel Joint 3996 series low profile is a perfect solution where vertical height is limited. Its low profile design compared to that of a normal swivel results in a reduction of height in the overall articulated pipework. This Swivel is often used as part of EWFM’s loading arms where a specific minimised height is required. The Swivel joint is constructed in Carbon Steel with butt weld ends in sizes 3″ and 4″. Although it is low profile this Swivel still has 2 rows of ball bearings on hardened and ground tracks meaning it’s suitable for most conditions and standard loads. We also offer an option with Stainless Steel sealing surfaces which increases the longevity of the Swivel. Please see the Model 2004 for an even more low profile swivel in this case with one set of ball bearings.

Available sizes

3″, 4″

Standard design

Carbon Steel construction

Assemblies

Swivels supplied as individual swivels or fabricated with elbows and end fittings in styles 20, 30, 40, 50 60, 70, 80 & 10.

Applications

Loading Arms
Low profile pipe work assemblies

Also see below product specification sheets for more information

Note that there are options for materials and duties as well as styles and dimensions.

 

Model 3996 reduced height Swivel Joint – Standard Carbon Steel Construction

Model 3996-WNE reduced height Swivel Joint – Standard Carbon Steel Construction with Stainless Steel sealing surfaces