Compact Swivel Joints
25img2.jpg20170524062240_IMG_3144 (3)20170524062255_IMG_3145 (5)20170524062312_IMG_3147 (4)e

Compact Swivel Joints – Carbon Steel and Stainless Steel

Compact Swivel Joints design offers a light weight construction with combination bearings. Where space is limited this Swivel Joint is especially ideal. We also believe this Swivel Joint to be the most compact swivel design currently available. Commonly designed around the industry standard ASME 16.5 150lb flange dimensions, it is however possible to re-drill to match other flange faces on request. The Compact Swivel Joint can be specified where a very low stack height is required. Please note the minimal standard nut clearance between the flanges. The unit is greasable as standard and with full compliment bearing races too for maximum loads and life.

 

Where a higher load capacity is required, please see the engineered Swivel Joint or send us an enquiry with your requirements. Furthermore for a more basic low profile Swivel joint please see our Swivel Joint 2004 and 3996 series. These either have one or two rows of ball bearings and are ideal where there is minimal load requirements. Please note however that these are only manufactured in 3″ and 4″.

 

Sizes (Inches)

2″, 3″, 4″, 5″, 6″, 8″, 10″, 12″

ANSI 150 lb flanges (others are also available on request)

 

Materials

Carbon Steel

Stainless Steel 316L

 

Seal Materials

Nitrile

Fluorocarbon

PTFE

 

Applications

Pipe assemblies

Fixed to flexible pipe

Steam transfer

 

Also see below product specification sheets for more information

Category:

Product Description

Compact Swivel Joints

Compact Swivel Joints design offers a light weight construction with combination bearings. Where space is limited this Swivel Joint is especially ideal. We also believe this Swivel Joint to be the most compact swivel design currently available. Commonly designed around the industry standard ASME 16.5 150lb flange dimensions, it is however possible to re-drill to match other flange faces on request. The Compact Swivel Joints can be specified where a very low stack height is required. Please note the minimal standard nut clearance between the flanges. The unit is greasable as standard and with full compliment bearing races too for maximum loads and life.

Where a higher load capacity is required, please see the engineered Swivel Joint or send us an enquiry with your requirements. Furthermore for a more basic low profile Swivel joint please see our Swivel Joint 2004 and 3996 series. These either have one or two rows of ball bearings and are ideal where there is minimal load requirements. Please note however that these are only manufactured in 3″ and 4″.

Sizes (Inches)

2″, 3″, 4″, 5″, 6″, 8″, 10″, 12″

ANSI 150 lb flanges (others are also available on request)

Materials

Carbon Steel

Stainless Steel 316L

Seal Materials

Nitrile

Fluorocarbon

PTFE

Applications

Pipe assemblies

Fixed to flexible pipe

Steam transfer

Also see below product specification sheets for more information

 

Compact Swivel Product Specification