At EWFM we used to only sell nozzles to the MOD (The G180 and G457. They were used for refuelling helicopters with aviation fuel.
The world has now changed and we have evolved with it, allowing us to diversify into other areas including selling nozzles to dispense other hazardous, corrosive and hygienic medias. Our latest range of nozzles are engineered to order allowing us to cater for a wide variety of requirements.
To give you an idea of what we can do, the following nozzles for different applications have been supplied to customers:
2″ Stainless Steel Automatic Nozzle with a Integrated Swivel Joint, 90 Degree Drop Tube, EPDM Seals and additional flow meter.
1/2″ Stainless Steel Manual Nozzles with a 25 degree drop tube and Viton food grade seals.
1/2″ Stainless Steel Manual Nozzle with 35 degree drop tube, installed with a Aluminium comb sprayer and additional Swivel Joint.
G180 refuelling nozzles and G457 hot refuelling nozzle – A number of varieties with straight and curved spouts.
Fuels – Diesel, Petrol & Kerosene
1” Stainless Steel Automatic Filling Nozzles with additional Swivel Joint, a 90 degree drop tube and a grounding cable.
½” Stainless Steel Manual Nozzle with 20 degree drop tube, PFE and PTFE seals
1″ Stainless Steel Automatic Nozzle with a 90 degree drop tube and a cone vapour recovery system
Our engineered nozzle range can be customised in many ways. In general, they are as follows:
- Manual (Pull the trigger to open the valve, release to close)
- Automatic (Much like a petrol pump you use to fill you cars, it senses the back pressure once full and automatically cuts off)
- Stainless Steel (316Ti)
- Hastelloy (C22)
- PTFE lined
- Threaded (BSP, NPT)
- Flanged (DIN, ANSI, PN)
- Tri Clamp
Drop Tube Type
- A range of vapour recovery options
- Extended lances for bottom filling (As seen in picture to the right – 1.2 Meters)
- Nitrogen purge
- Proximity Sensor
If you have a requirement for a nozzle which is not stated above, please challenge us with your enquiry! We will be excited to help.
If you don’t think a Nozzle will do the job or you are working with a viscous media with particles, perhaps our drum filling head will? The Drum Filling Head with Automatic Level Sensor is used for filling, drums, IBCs, totes, barrels and casks. It is currently being used by companies in the food, beverage, distilling, cosmetic, pharmaceutical, chemical and oil industries.
If you would like to discuss your requirement further or if you have a unusual application and want to see what is possible, please do not hesitate to contact our Sales Team: