Description
Long Range Top Loading Arm with vapour recovery
The supported boom Long Range Top Loading arm with vapour recovery is mounted on a horizontal boom assembly. It gives a wide range of operation on both vertical and horizontal planes. This allows multiple truck or rail car compartments to be loaded without the need for re-positioning.
This loading arm includes a vapour recovery cone. The cone fits into the manhole trapping the vapour and forcing it out through the vapour recovery line. This not only stops vapour polluting the atmosphere but it also improves profitability as the vaporised product can potentially be recovered.
This top loading arm is supplied with a with three Swivel Joints and one Swivel Elbow for vertical and horizontal positioning.
Furthermore the long range top loading arm with vapour recovery also includes, a compression spring balance cylinder for ease of movement, a pneumatic valve, extension/remote control for outboard loading valve operation, fitted with a vacuum breaker to allow fast drainage. As this arm includes the vapour recovery cone it means you cannot see the level of the fluid in the tanker, for this reason the arm is fitted with an overfill sensor. The overfill sensor senses when the fluid has reached a set level near the top and sends a electrical signal either shutting of the valve, the pump or even both.
Sizes
3″, 4″ & 6″.
Inlet
from above or below / left hand or right hand configurations.
Models
Standard fuels and Biofuels.
Accessories :
Flute beak end
Flow detectors
Micro switch to signal when valve opened or closed
NDT tests (X-ray)
Please also see product specification sheet below for more information