Variable Reach Chemical Top Loading Arm Model 2374
Variable Reach Chemical Top Loading Arm Model 2374 Operating Layout

Variable Reach Chemical Top Loading Arm | Top Loading Arms | Model 2374

The model 2374 variable reach chemical top loading arm is the most commonly used loader for top filling road and rail chemical tankers. This is due to its variable operating range, therefore allowing multiple tanker compartments to be filled without the need to re position the truck.

 

This Variable Reach Chemical Top Loading Arm design includes, four swivel joints for horizontal and vertical positioning, a compression spring balance cylinder for ease of movement, loading valve with either hold-open or stay-open operation, extension/remote control for outboard loading valve operation, fitted with a vacuum breaker to allow fast drainage. It is available in left or right hand configuration, please specify your requirement with the enquiry also along with any other extras.

 

In addition, this arm can be supplied on a stand post on request, this may be required where you do not have a gantry for which the arm cant be fitted to.

 

Manufactured to ATEX / PED standards

 

Material

Stainless Steel.

 

Sizes

3″ & 4″.

 

Inlet

from above or below / left hand or right hand configurations.

 

Models

Chemical, please see model 621/721 for our Hydrocarbon alternative.

 

Accessories :

Flute beak end

Flow detectors

Micro switch to signal when valve opened or closed

Rotational micro switches to signal when the arm is in use

NDT tests (X-ray)

 

Please also see product specification sheet below for more information

Product Description

Variable Reach Chemical Top Loading Arm

The model 2374 variable reach chemical top loading arm is the most commonly used loader for top filling road and rail chemical tankers. This is due to its variable operating range, therefore allowing multiple tanker compartments to be filled without the need to re position the truck.

This Variable Reach Chemical Top Loading Arm design includes, four swivel joints for horizontal and vertical positioning, a compression spring balance cylinder for ease of movement, loading valve with either hold-open or stay-open operation, extension/remote control for outboard loading valve operation, fitted with a vacuum breaker to allow fast drainage. It is available in left or right hand configuration, please specify your requirement with the enquiry also along with any other extras.

In addition, this arm can be supplied on a stand post on request, this may be required where you do not have a gantry for which the arm cant be fitted to.

Manufactured to ATEX / PED standards

Material

Stainless Steel.

Sizes

3″ & 4″.

Inlet

from above or below / left hand or right hand configurations.

Models

Chemical, please see model 621/721 for our Hydrocarbon alternative.

Accessories :

Flute beak end

Flow detectors

Micro switch to signal when valve opened or closed

Rotational micro switches to signal when the arm is in use

NDT tests (X-ray)

Please also see product specification sheet below for more information