Choosing the right materials for a loading arm is essential for safe, reliable and long lasting product transfer. From carbon steel and stainless steel to specialist alloys and hygienic sealing materials, the correct specification depends on the product being handled, the operating environment and the conditions in which the equipment must work.
Loading arms are used across industries including fuel distribution, chemical processing, marine terminals, food and beverage production, pharmaceuticals and the handling of hot products such as bitumen. Each application presents different challenges, which is why material selection should be considered as part of the overall loading arm design.
In this guide, we explore the main materials used in loading arms, the factors that influence material selection and how corrosion resistance, seals and operating temperatures affect the final specification.
Why does material selection matter?
A loading arm must withstand more than the product flowing through it. Its materials must also cope with operating pressure, temperature changes, repeated movement and exposure to the surrounding environment.
Two important considerations are:
- Internal compatibility: Can the material withstand the product being transferred, including its chemical composition, concentration and temperature?
- External corrosion resistance: Can the material withstand moisture, salt spray, chemicals and other environmental conditions?
There are also applications where hygiene and contamination control are critical. In food, beverage and pharmaceutical processing, product contact surfaces must be suitable for the material being transferred and the cleaning procedures used.
Selecting the wrong materials can lead to corrosion, seal failure, contamination, leakage and increased maintenance requirements. The objective is to specify a loading arm that meets the demands of its application without unnecessary cost or complexity.
Common materials used in loading arms
Carbon steel
Carbon steel is widely used because it offers good mechanical strength, is readily fabricated and can provide a cost effective solution for many industrial applications.
It is commonly considered for loading arms handling compatible fuels, petroleum products and oils. Where external corrosion is a concern, suitable coatings and paint systems can help protect the equipment.
However, carbon steel is susceptible to corrosion when exposed to moisture and oxygen. Its suitability must also be assessed against the product being transferred, as certain chemicals can cause unacceptable corrosion.
Best suited to: Compatible industrial products where mechanical strength and cost effectiveness are important and external corrosion can be adequately controlled.
Stainless steel
Stainless steel is a popular choice where corrosion resistance, cleanliness or chemical compatibility are important.
Its protective passive surface film helps resist corrosion, making it suitable for many industrial and chemical transfer applications. Different grades offer different levels of protection.
For example, 316 stainless steel contains molybdenum, which generally improves resistance to chloride related pitting compared with 304 stainless steel.
However, stainless steel is not completely corrosion proof. Chlorides, elevated temperatures and deposits trapped in crevices can cause localised corrosion. The appropriate grade must therefore be selected according to the actual exposure conditions.
Best suited to: Many chemical transfer duties, demanding outdoor environments and applications requiring corrosion resistance or hygienic construction.
Aluminium
Aluminium offers a combination of low weight and good corrosion resistance in many environments. Its relatively low density can make a loading arm easier to handle and may reduce loads on its supporting structure.
It can be an attractive option for selected industrial applications where the product and operating conditions are compatible.
However, aluminium is unsuitable for some chemicals, and its mechanical properties at elevated temperatures must be considered. Contact with dissimilar metals can also create galvanic corrosion risks.
Best suited to: Selected industrial duties where low weight and ease of handling are priorities.
Duplex stainless steel and specialist alloys
Some applications require greater strength or better resistance to particular forms of corrosion than conventional stainless steel can provide.
Duplex stainless steels combine ferritic and austenitic metallurgical structures, providing higher mechanical strength and improved resistance to chloride related stress corrosion cracking compared with many conventional austenitic stainless steels. Super duplex grades can offer further enhanced resistance to pitting and crevice corrosion in suitable environments.
For particularly challenging chemical applications, nickel based alloys such as Hastelloy may also be appropriate. Different grades offer different resistance to acids, chlorides and other aggressive process chemicals.
These specialist materials can increase material costs and introduce additional fabrication considerations. Their suitability should be assessed against the actual product and operating conditions.
Best suited to: Demanding marine, chemical and specialist industrial applications where conventional materials may not provide the required performance.
Food, beverage and pharmaceutical loading arms
Food, drink and pharmaceutical applications introduce an additional consideration: hygienic design.
In these industries, the loading arm must not only withstand the product but also help prevent contamination and allow effective cleaning. This can significantly influence the choice of metal, surface finish, seals and connection design.
Why is 316L stainless steel often specified?
Stainless steel is widely used for hygienic product contact surfaces because of its corrosion resistance, durability and suitability for cleaning. Depending on the application, 316L may be specified, particularly where chemical resistance and welded fabrication requirements make it appropriate.
The precise grade should be selected according to the product, cleaning chemicals, temperatures and relevant industry requirements.
Surface finish is equally important. Product contact surfaces may need to be mechanically polished or electropolished to achieve the required finish. A smoother surface can make residues easier to remove and reduce locations where contamination could accumulate.
Weld quality, crevices, dead spaces, drainage and the design of joints must also be considered. A polished stainless steel surface alone does not make an assembly hygienic if the overall design prevents effective cleaning.
Carbon steel and aluminium would not normally be selected for the product contact surfaces of demanding sanitary loading arms where stainless steel is required by the process specification.
Food grade seals and gaskets
The sealing materials must be just as carefully selected as the metalwork.
Seals and gaskets must be compatible with the product and cleaning regime, withstand the operating temperature and meet the relevant food contact requirements. Depending on the application, suitable compounds may include specific grades of EPDM, silicone, FKM or PTFE.
It is important to verify the compliance of the actual compound and finished component rather than rely solely on the generic material name. For example, not every FKM compound is automatically suitable for food contact.
In the UK and European market, applicable food contact legislation and supporting documentation should be considered. US FDA compliance may also be relevant where required by the customer or destination market.
Pharmaceutical applications can impose additional requirements relating to product purity, cleanability, traceability and cleaning in place or sterilisation in place procedures. The specification should reflect the particular process rather than assume that a food grade material automatically meets pharmaceutical requirements.
Marine environments: protecting against external corrosion
Marine and coastal installations demonstrate why the surrounding environment matters just as much as the product inside the loading arm.
Salt laden air, moisture and seawater exposure can accelerate corrosion on exposed equipment. Stainless steel is often considered for these environments, but the grade and installation conditions are important.
When specifying a loading arm for marine service, consider exposure to salt spray, direct seawater contact, moisture accumulation around joints, dissimilar metals and maintenance requirements.
Depending on the severity of the exposure, protective coatings, suitable stainless steel grades, duplex alloys or other specialist materials may be appropriate.
The key is to assess the actual environment rather than assume that all stainless steels provide the same level of protection.
Seal materials for industrial applications
Beyond hygienic duties, loading arms handling fuels and chemicals may require specialist sealing materials.
PTFE: Offers resistance to a broad range of chemicals and is widely used in demanding industrial applications.
Viton®: Often used for fuels, oils and many hydrocarbons. Its suitability depends on the chemical, temperature and specific compound.
Chemraz® and Kalrez®: Can offer a combination of broad chemical resistance and elastomeric sealing properties for particularly demanding duties. These materials can be expensive, and performance varies between formulations.
Other materials, including nitrile rubber (NBR), HNBR and EPDM, may also be appropriate for selected applications. Each has different strengths and limitations. The correct seal must be selected according to the product, concentration, pressure, temperature and expected service life. Chemical compatibility data should be checked before finalising the specification.
Heated loading arms: handling bitumen and other hot products
Some products, including bitumen, asphalt and certain heavy oils, must be maintained at an elevated temperature to achieve the required flow characteristics.
Loading arms for these applications may incorporate heating and insulation to help maintain product temperature and reduce the risk of the material cooling and solidifying.
Common heating arrangements include:
- Electrical heating: Electric heat tracing maintains the required temperature along the loading arm.
- Steam heating: Steam is used in a suitable jacket or tracing arrangement.
- Thermal oil heating: Heated oil circulates through a designed heating system.
The most appropriate option depends on the product, required temperature, site utilities and operating requirements.
EWFM offers heated loading arm solutions for applications including bitumen, asphalt, sulphur and selected oils and chemicals.
Material selection is particularly important because elevated temperatures can affect corrosion rates, mechanical properties and seal performance. Thermal expansion, insulation, temperature control and the management of residual product must also be considered.
A seal that performs well at ambient temperature may not be suitable for a hot product duty. Compatibility must be assessed at the actual operating temperature.
Why loading arms are often bespoke
There is rarely one universal material specification for every loading arm. Two arms that look similar may require different materials because they handle different products, operate at different temperatures or are installed in different environments.
A loading arm transferring diesel may have different requirements from one handling an aggressive chemical. An arm installed at a coastal terminal may need a different corrosion protection strategy from equipment operating indoors. A pharmaceutical loading application may require polished stainless steel and documented product contact materials, while a bitumen loading arm may require specialist heating and insulation.
The specification should consider the product, operating conditions, installation environment, all wetted components, seal compatibility, cleaning requirements and expected service life.
This application specific approach helps ensure that each component is suitable for its intended duty.
Choosing the right loading arm material
The right material depends on the complete application, not simply the product flowing through the pipework. Carbon steel, stainless steel and aluminium each have their place, while duplex stainless steel and specialist alloys can provide solutions for more demanding duties. Hygienic applications introduce further requirements for surface finish, cleanability and food contact compliance.
At EWFM, loading arms can be specified for a wide range of applications, from conventional fuel transfer to chemical handling, food and beverage processes and specialist hot product duties.
If you are specifying a new loading arm or reviewing an existing installation, discussing the product, temperature, pressure and site conditions with an experienced supplier is an important step towards finding the right solution.















