Variable Reach Top Loading Arm Model 621-BC & 721-BC
Variable Reach Top Loading Arm Model 621-BC & 721-BC Operating Layout36img2.jpg36img3.jpg36img4.jpg36img5.jpg

Variable Reach Top Loading Arm | Top Loading Arms | Model 621-BC/721-BC

The model 621-BC/721-BC variable reach top loading arm is the most commonly used loader for top filling road tankers. This is due to its variable operating range, allowing multiple tanker compartments to be filled without the need to re position the truck. We offer two models of variable reach top loading arm 621-BC for high use/volume and 721-BC for low use/volume.

 

This model of top loading arm design includes, four swivel joints for horizontal and vertical positioning, a compression spring balance cylinder for ease of movement, loading valve with either hold-open or stay-open operation, extension/remote control for outboard loading valve operation, fitted with a vacuum breaker to allow fast drainage. It is available in left or right hand configuration. Please specify your requirement with the enquiry.

 

Manufactured to ATEX / PED standards

 

Sizes

3″ & 4″.

 

Inlet

from above or below / left hand or right hand configurations.

 

Models

Standard fuels and Biofuels. Other medias are also suitable, please however specify these with your enquiry.

 

Accessories

Flute beak end

Flow detectors

Micro switch to signal when valve opened or closed

Rotational micro switches to signal when the arm is in use

NDT tests (X-ray)

 

Please also see product specification sheet below for more information

Product Description

Variable Reach Top Loading Arm

The model 621-BC/721-BC variable reach top loading arm is the most commonly used loader for top filling road tankers. This is due to its variable operating range, allowing multiple tanker compartments to be filled without the need to re position the truck. We offer two models of variable reach top loading arm 621-BC for high use/volume and 721-BC for low use/volume.

This model of top loading arm design includes, four swivel joints for horizontal and vertical positioning, a compression spring balance cylinder for ease of movement, loading valve with either hold-open or stay-open operation, extension/remote control for outboard loading valve operation, fitted with a vacuum breaker to allow fast drainage. It is available in left or right hand configuration. Please specify your requirement with the enquiry.

Manufactured to ATEX / PED standards

Sizes

3″ & 4″.

Inlet

from above or below / left hand or right hand configurations.

Models

Standard fuels and Biofuels. Other medias are also suitable, please however specify these with your enquiry.

Accessories

Flute beak end

Flow detectors

Micro switch to signal when valve opened or closed

Rotational micro switches to signal when the arm is in use

NDT tests (X-ray)

Please also see product specification sheet below for more information