Swivel Joint 2815 Series
2815-swivel-joint-drawing2815-swivel

Swivel Joint 2815 Series – Carbon Steel with a Stainless Steel Liner

The Swivel Joint 2815 series is a three piece split flange design like EWFM’s Swivel Joint 2833 series. Only available in Carbon Steel, its main advantage over the 2833 is its Stainless Steel 316L liner. This in turn means the Swivel has the strength of a Carbon Steel swivel, however can cater for more aggressive media as well as hygienic media. The Swivel is therefore suitable for unsupported loads, a large range of chemicals, foods, beverages and much more. The three piece design allows a quick and easy primary seal change without having to remove ball bearings. If you are looking for a strong cost effective Swivel that can cater for a large range of media then the model 2815 Swivel joint is for you.

 

Available sizes

1.5″ 2″ 3″ 4″ 6″

 

Standard design

Carbon Steel with a Stainless Steel liner, Hardened Carbon Steel with a Stainless Steel liner (other material available on request).

 

Assemblies

Swivels supplied as individual swivels or fabricated with elbows and end fittings in styles 20, 30, 40, 50 60, 70, 80 & 10.

 

Applications

Loading arms.

Piping systems.

Food duty systems.

Chemical systems.

 

Please also see below product specification sheets for more information

Note that there are options for materials and duties as well as styles and dimensions.

Category:

Product Description

Swivel Joint 2815 Series

The Swivel Joint 2815 series is a three piece split flange design like EWFM’s Swivel Joint 2833 series. Only available in Carbon Steel, its main advantage over the 2833 is its Stainless Steel 316L liner. This in turn means the Swivel has the strength of a Carbon Steel swivel, however can cater for more aggressive media as well as hygienic media. The Swivel is therefore suitable for unsupported loads, a large range of chemicals, foods, beverages and much more. The three piece design allows a quick and easy primary seal change without having to remove ball bearings. If you are looking for a strong cost effective Swivel that can cater for a large range of media then the model 2815 Swivel joint is for you.

Available sizes

1.5″ 2″ 3″ 4″ 6″

Standard design

Carbon Steel with a Stainless Steel liner, Hardened Carbon Steel with a Stainless Steel liner (other material available on request).

Assemblies

Swivels supplied as individual swivels or fabricated with elbows and end fittings in styles 20, 30, 40, 50 60, 70, 80 & 10.

Applications

Loading arms.

Piping systems.

Food duty systems.

Chemical systems.

Please also see below product specification sheets for more information

Note that there are options for materials and duties as well as styles and dimensions.

 

Model 2815 Swivel Joint – Standard Carbon Steel and AISI 316L Construction

Model 2815-HD Heavy Duty Swivel Joint – Standard Carbon Steel and AISI 316L Construction

Model 2815-C Swivel Joint – Standard Carbon Steel and AISI 316L Construction

Model 2815-HD-C Heavy Duty Swivel Joint – Standard Carbon Steel and AISI 316L Construction

Styles and Dimensions – Model 2833-2815-3815 – Split Flange Design Swivel Joints