Fixed Reach Top Loading Arm Jacketed Model 2570-Jack
Fixed Reach Top Loading Arm Jacketed Model 2570-Jack Operating Layout

Fixed Reach Jacketed Top Loading Arm – Model-2570-JACK

EW Fuel Management Ltd supply the fixed reach jacketed top loading arm which is designed for top loading rail cars and road tankers where the manhole fill point is at a set position for loading. Consequently these arms are suitable for transferring hot fluids such as asphalt, sulphur and bitumen.

They are available with either heating jackets and connection lines for steam, heating oil or alternatively by electrical heat tracing (explosion proof certified). see 2570-TRC.  The Fixed Reach Jacketed Top Loading Arm is available in various designs suitable for handling products that require heating, including food products, chemicals, oils and resins.

They come in three different standard sizes therefore three flow rates.

Flow Rates

3″ x 2″ 20 mc/h

4″ x 3″ 35 mc/h

6″ x 4″  60 mc/h

Operating Conditions

Design Pressure 10.0 bar G

Test Pressure 15.0 bar G

Design Temp. -15 C to + 200 C

Seal Material Fluoroloy K

Construction

Style 50 jacketed double swivel joint

Jacketed ball valve with gear operation

Primary arm (liquid)

Primary arm (jacket)

Style 40 jacketed swivel joint

Drop tube with standard end

Spring balance cylinder

3/4″ self closing vacuum breaker

Lock-down device

Handwheel valve remote control

Steam hose inlet

Steam hose outlet

Handle

Hooking drip bucket

Options

Smoke suction system (with cover and flexible line flanged end)

Level sensor (pneumatic or electronic) installed on cover or positional spider

Loading valve pneumatically operated

Vacuum breaker pneumatically operated

\insulation up yo the final swivel

NDT test ( X-ray-LP-MT)

Please also see below product specification for more information

Product Description

EW Fuel Management Ltd supply the fixed reach jacketed top loading arm which is designed for top loading rail cars and road tankers where the manhole fill point is at a set position for loading. Consequently these arms are suitable for transferring hot fluids such as asphalt, sulphur and bitumen.

They are available with either heating jackets and connection lines for steam, heating oil or alternatively by electrical heat tracing (explosion proof certified). see 2570-TRC.  The Fixed Reach Jacketed Top Loading Arm is available in various designs suitable for handling products that require heating, including food products, chemicals, oils and resins.

They come in three different standard sizes therefore three flow rates.

Flow Rates

3″ x 2″ 20 mc/h

4″ x 3″ 35 mc/h

6″ x 4″  60 mc/h

Operating Conditions

Design Pressure 10.0 bar G

Test Pressure 15.0 bar G

Design Temp. -15 C to + 200 C

Seal Material Fluoroloy K

Construction

Style 50 jacketed double swivel joint

Jacketed ball valve with gear operation

Primary arm (liquid)

Primary arm (jacket)

Style 40 jacketed swivel joint

Drop tube with standard end

Spring balance cylinder

3/4″ self closing vacuum breaker

Lock-down device

Handwheel valve remote control

Steam hose inlet

Steam hose outlet

Handle

Hooking drip bucket

 

Options

Smoke suction system (with cover and flexible line flanged end)

Level sensor (pneumatic or electronic) installed on cover or positional spider

Loading valve pneumatically operated

Vacuum breaker pneumatically operated

Insulation up to the final swivel

NDT test ( X-ray-LP-MT)

 

Please also see below product specification for more information