A Frame Triple Range Bottom Loading Arm Model 2475
A Frame Triple Range Bottom Loading Arm Model 2475 Operating Layout 1

A Frame Triple Range Bottom Loading Arm | Bottom Loading Arms | Model 2475

The A Frame triple range bottom loading arm design offers bottom loading operation mounted at ground level. Often used in areas with reduced spaces, this is due to the Arms ability to be parked at almost the vertical position. Furthermore, wherever the arm is positioned for operation the outlet remains horizontal which is maintained by a gas spring balance unit. This model of loader may be used for single or double sided loading where site conditions allow.

 

In addition, the arm consists of a total off five Swivel joints. Three are used for vertical movement where as the other two are used for horizontal movement. Very often the arm is connected to the pipe through an ANSI 150 flange (others are also available on request). The arm also includes a API coupler or a dry disconnect coupler for an easy connection to your road or rail tanker.

 

Manufactured to ATEX / PED standards.

 

Available in Sizes

3″ & 4″.

 

Models

Standard fuels and also Bio fuels.

 

Accessories

Safety Breakaway Coupling model 4222

Check Valve model 2141

Proximity switch to signal coupler is connected

Locking device to store the arm in the vertical position

Colour coded Hose Identification Sleeves.

Stand / Mount Post

NDT test (X-ray) also available on request

 

Please also see product specification sheet below for more information

Product Description

A Frame Triple Range Bottom Loading Arm – Model 2475

The A Frame triple range bottom loading arm design offers bottom loading operation mounted at ground level. Often used in areas with reduced spaces, this is due to the Arms ability to be parked at almost the vertical position. Furthermore, wherever the arm is positioned for operation the outlet remains horizontal which is maintained by a gas spring balance unit. This model of loader may be used for single or double sided loading where site conditions allow.

In addition, the arm consists of a total off five Swivel joints. Three are used for vertical movement where as the other two are used for horizontal movement. Very often the arm is connected to the pipe through an ANSI 150 flange (others are also available on request). The arm also includes a API coupler or a dry disconnect coupler for an easy connection to your road or rail tanker.

Manufactured to ATEX / PED standards.

Available in Sizes

3″ & 4″.

Models

Standard fuels and also Bio fuels.

Accessories

Safety Breakaway Coupling model 4222

Check Valve model 2141

Proximity switch to signal coupler is connected

Locking device to store the arm in the vertical position

Colour coded Hose Identification Sleeves.

Stand / Mount Post

NDT test (X-ray) also available on request

Please also see product specification sheet below for more information