IBC Filling Equipment
EWFM supply an extensive range of IBC Filling Equipment designed for filling, emptying and connecting to IBC’s.
Drum Filling Head
The drum filling head is fitted with an IBC top lid adaptor. More often than not this is an S60 x 6 connection with a 2″ BSP hole. The drum filling ensures a gas tight filling solution with vapour recovery for filling IBC’s. If required it can be fitted with a nitrogen purge. The drum filling head is also fitted with a Overfill Protection Tuning Fork device which cuts the pump off automatically when filled.
Engineered Delivery Nozzles
Working much like a petrol pump, these are a great cost effective solution for filling an IBC with Automatic cut off. These dont however turn off the pump.
Loading Arms and Unloading Arms
The best option for bulk filling IBC’s. With Swivels to give the arms operation in both the vertical and horizontal direction these are easiest to handle. Vapour recovery, Overfill detection and many other extras are available on request.
Couplings
Looking for a quick, dry and safe connection to your IBC? Look no further, our range of dry disconnect coupling are ideal accessory to your IBC especially when bottom filling or emptying. We also strongly recommend the installation of a breakaway to prevent a pull away incident.
More often then not when dealing with IBC’s you are using a Flammable, Corrosive or Hygienic Media. Not to worry because all four solutions above can be manufactured in accordance to ATEX, supplied in exotic materials or polished on request.
